| Model | 10.5T | 13.5T | 17.5T | 21.5T |
| SKU | 30101156 | 30101157 | 30101158 | 30101159 |
| Kv | 3800 | 3000 | 2300 | 1900 |
| Ohm | 0.0136 | 0.0226 | 0.0355 | 0.0548 |
| Current w/o Load Amp | 3.3 | 2.5 | 1.8 | 1.6 |
| Max. Output Power* (W) | 290 | 240 | 190 | 140 |
| Max. Amp | 72 | 60 | 50 | 41 |
| Dimension (mm) | 174 | 178 | 172 | 174 |
| Weight (g) | 175g | 175g | 175g | 175g |
IMPORTANT NOTE:
► The “Maximum Output Power” is measured with 7.4V input voltage and ESC at ZERO timing. This parameter is neither the “maximum input power” nor the “rating power”, it is calculated by “RPM x Torque / 9550”. Because each factory runs a different testing platform, the above data may vary.
► Max Amp is the “Current at Peak Output Power”. It is a guide used for selecting the suitable power system (ESC, Motor, Gear ratio, etc.) If the actual input current of the power system is bigger than the peak parameter stated in the above table, this means that the power system settings/configuration is over its peak (or in other words, “overloaded”.)
► The “KV” is measured without any load on the motor and ESC at ZERO timing. Do NOT run the motor without load for long periods of time (1 minute), otherwise the motor may overheat.
► Due to extremely high-spec product, BANDIT motor isn't compliant with ROAR, IFMAR, BRCA and JMRCA rules.
