Recent Products
-
Tattu R-Line 1550mAh 95C 6S1P Lipo €49,90€39,00 inc. Vat - 1250mAh 22.2V 60C 6S1P Lipo (Goblin Fireball / Mini Comet) €36,90 inc. Vat
- 2250 mAh 6.6V 2S1P Li-Fe Battery for Radio Transmitter €19,90 inc. Vat
-
Hook & Loop Strap (8x140mm) €5,95 inc. Vat - 2600mAh 7.4V 2S1P Receiver/Transmitter Pack €19,90 inc. Vat
LOGO 200 Super Bind & Fly Premium Case Combo
€699,00 inc. Vat
This LOGO 200 does not support other radio systems than VBar Control, without further adjustments.
At your own discretion, you can use VBar Control to select a digital third party protocol as an input, and make the necessary channel adjustments.
You then obviously also need a suitable separate third party receiver.
Adjustments to the flight parameters can only be made with VBar Control. VBar NEO mini can not be set up via computer software.
If set up properly, you can then fly the model with VBar’s motor switch logic, three parameter banks, and use Rescue and/or Beginner mode (if installed).
Note: Vbar touch radio is not included!!!
Out of stock
Email when stock available
- BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
- The LOGO 200 comes in a nice case with black faux leather (45x38x15).
- The case offers space for a VBar Control radio, 5 pc. batteries, charger, tools and spare parts
- Exceptional flight performance, comparable to larger 600-700 class helis
- Equally suitable for sports flying, aerobatics and 3D flying
- Wide range of head speeds, from 2,500-7000+ 1/min possible
- Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
- Dual Motor System, direct drive for main and tail rotor
- Dual ESC with metal case
- VBar NEO mini 6.4 Flybarless System with ‘Anti Gravity’
- VBar NEO already set up, no setup on your own required, just bind and fly
- VBar NEO Governor with RPM telemetry
- Micro digital servos with metal gears for the swashplate
- Carbon frame and landing gear
- Aluminum rotor head and swashplate
- VTX main rotor blades
- Glass Fiber Airbrush canopy
Manual English
| Specifications Helicopter | |
| Rotor diameter | 400 mm |
| Rotor blades | VTX 173 mm |
| RTF weight | approx. 310 g |
| recommended batterie | Lipo 3S-650 mAh (included) |
| Main gear ratio | 1 |
| Tail gear ratio | 1 |
| Main Gear size | ./. |
| Length | 420 mm |
| Hight | 135 mm |
| Width | 74 mm |
| Content | |
| Kit | LOGO 200 Super Combo ARF |
| Motors | OMPHOBBY |
| ESC | OMPHOBBY |
| VBar electronic | VBar NEO mini VLink 6.4 |
| Servos | 3 x digital micro servo w/ metal gears, OMPHOBBY |
| Blades | VTX 173 mm |
| Tail Blades | 71 mm |
| Canopy | Airbrush canopy |
Related products
LOGO 550 SE V2 Super Combo, yellow/blue/black
€999,00 inc. VatRead moreLOGO 550 SE is the next step in the LOGO 500 Series. The LOGO 550 SE keeps all the proven and popular components of the LOGO 500, while incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.
Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500 SE and 550 SE size LOGO helicopters.– 600 mm main blades
– 6 S Lipo mit 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
– light und durable chassis fiberglass reinforced frame with battery quick release system
– direct servo link to the swashplate
– Hollow main shaft with 10mm diameter
– Herringbone main gear with 153 teeth (module 0.7)
– Motor counterbearing with additional main shaft support
– colored fin set in neon red, matched with the canopy
– Extra-strong 22 mm diameter tail boom
– Detailed airbrush canopy in neon yellowLOGO 600 SX
€779,00 inc. VatRead moreLOGO 600 SX is the next step in the LOGO 600 Series. The LOGO 600 SX keeps all the proven and popular components of the LOGO 600, while incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.
– 600-620 mm main blades
– 10 S Lipo mit 5,000 mAh, 12 S Lipo, max 3,500 mAh
– light and durable fiberglass reinforced chassis frame with battery quick release system
– alu-rotor head yoke with hollow 8 mm spindle shaft and extra-large thrust bearings (Ø 16 mm)
– direct servo link to the swashplate
– hollow main shaft with 10 mm diameter
– herringbone main gear with 106 teeth (module 1)
– motor counterbearing with additional main shaft support
– colored fin set in neon red, matched with the canopy
– extra-large 25 mm diameter tail boom
– detailed airbrush canopy
Reviews
There are no reviews yet.