Recent Products
-
Xnova Lightning 4020-1350KV 2Y
€219,00 inc. Vat
-
Xnova Lightning 4020-1200KV 2Y
€219,00 inc. Vat
-
Xnova Lightning 4020-1000KV 2Y
€219,00 inc. Vat
-
Xnova 4020-1350KV 2Y
€199,00 inc. Vat
-
Xnova 4020-1200KV 2Y
€199,00 inc. Vat
LOGO 700 VBar/Scorpion Motor Combo
€1.499,00 inc. Vat
Systematically designed and put to the test, for tough competition flying.
The ideal 700 size machine, for every pilot, for every style of flying.
Out of stock
Email when stock available
The LOGO 700 is the worthy successor to the venerable LOGO 700 XXtreme.
It utilizes tried and tested mechanical components like
- Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise.
- Belt step-up gear to the tail gear box in the chassis.
- Torque tube.
- Sturdy tail gear box now fully encapsulated, lighter, almost maintenance-free and protected against dust and dirt.
The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis.
The benefits at a glance:
- Facilitates assembly, maintenance and repairs.
- The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
- The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
- The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
- The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
- In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
- Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
- The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
- The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.
The newly designed rotor head is lighter and looks more delicate, but at the same time gives you the same good flight- and control characteristics. It’s as robust as ever.
Recommended main rotor blade sizes are 690-717 mm, depending on your personal taste and style of flying.
To power the 700, you can rely on reliable components from the LOGO 700 XXtreme, with 6 mm motor shafts.
Motors with other shaft diameters can be adapted easily by just replacing the shaft.
In the beginning, there will be two gear ratios available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.
Motors with a larger bell than e.g. a Scorpion 4525-520 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.
The newly designed canopy of the LOGO 700 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 700 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor. This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.
Color accents to the tail fin also help with visibility.
With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,300 g / 11.86 lb is possible.
Related products
-
LOGO 480 XXtreme Scorpion motor combo, yellow/red
€599,00 inc. VatRead moreThe LOGO 700 and 800 XXtreme helicopters just had a little brother:Â it is the LOGO 480 XXtreme helicopter.
This smaller 480 version has a rotor diameter of 1090 mm (EDGE blades 473).
It is operated with a 6S Lipo battery (max. 4000 mAh).
The very sturdy herringbone gear and the light-weight and reliable belt drive will suit novices as well as more ambitious 3D pilots.
-
LOGO 550 SX Scorpion Motor Combo
€699,00 inc. VatRead moreThe LOGO 550 SX is the first member of the next evolutionary step of our popular and proven LOGO 500/550/600 helicopter series.
Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500/550/600 size LOGO helicopters.– 550 mm main blades
– 6 S Lipo mit 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
– light und durable chassis fiberglass reinforced frame with battery quick release system
– direct servo link to the swashplate
– Hollow main shaft with 10mm diameter
– Herringbone main gear with 153 teeth (module 0.7)
– Motor counterbearing with additional main shaft support
– colored fin set in neon red, matched with the canopy
– Extra-strong 22 mm diameter tail boom
– Detailed airbrush canopy in neon red -
LOGO 600 SE V3 kit
€599,00 inc. VatRead moreThe LOGO 600 SE is a special version of the LOGO 600 series with a longer tail boom. This allows using longer main rotor blades of about 690 mm in length. With the considerably larger rotor disc and nearly the same all-in-weight, the LOGO 600 SE is a very lightweight heli in the 690 class. The revised version has the counterbearing linked to the main rotor shaft and the one-piece head yoke oft he 600 SX series as well as a freshly designed canopy. Below the canopy, you find the battery quick release system and considerably more headroom for flight packs below the counter bearing.
– Very high flight performance for low RPM and 3D flying
– 690 mm rotorblades
– 10S Lipo (4,000-5,000mAh), 12S Lipo (max. 4,000 mAh)
– new one-piece metal rotorhead yoke with 8mm spindle shaft and extra-large thrust bearings
– light und durable fiberglass reinforced frame with battery quick release system
– hollow 10 mm main shaft
– new and stronger modul 1 herringbone main gear
– new counter bearing with main shaft support
– new fin set in neon-yellow color
– 25 mm tail boom
– Airbrush canopy
Categories
New Products
- Helicopter kits & Parts
- Align kits & Parts
- Mikado kits & Parts
- GAUI kits & Parts
- SAB kits & Parts
- Blade Heli spare parts
- Compass spare parts
- HD-Helicopters spare parts
- Hirobo spare parts
- MSHeli spare parts
- Nine Eagles
- VARIO
- Thunder Tiger Parts
- Main Blades
- Tailblades
- Flybar Paddles
- Canopies & Fuselages
- Pinions
- Robbe Shluter parts & Acc.
- Wallhangers for you’re helicopter
- Electronics
- Motors & Esc.
- FPV & Multicopter
- Flight sim & Acc.
- Glue, Grease & Cleaning Products
- Tools & Acc.
- Plastic model kits
- Paint, Brushes, Markers, Pencil & Acc.
- Building Materials & Acc.
- Gift Cards
- Nuts, Bolts, Washers & Bearings
- Cars & Boats
- Plane
- Other Brands
Reviews
There are no reviews yet.